lkpscripts.blogg.se

Just follow the instructions on the screen.

After that OS X can be installed on the new SSD. Before reinstalling, format the SSD using the disk utility (as “ Mac OS Extendet Journaled“).You will now be asked from which medium to boot.Then, press and hold the ALT key to turn on the Mac Mini. After the SSD is installed, plug in the USB stick.Now the new SSD must be installed in the Mac Mini (see installation for instructions).Create bootable OSX-Recoverystick (instruction).Create a backup with TimeMachine before a modification for the later data restore.Option 2: Reinstall OS X and restore the backup Then Carbon Copy Cloner or SuperDuper! can be used to create a fully bootable 1:1 copy of the hard disk on the SSD (this process can take several hours).The new SSD must now be formatted for the first time using the hard disk utility (as” Mac OS Extended Journaled“).Connect the SSD to the Mac Mini via USB (e.g.Before making a backup using a TimeMachine, a backup is always available in an emergency.The data and settings should of course be saved. Repeat to install the top memory module.īefore the built-in hard disk of Mac mini can be replaced by an SSD, we have to think about the available data and the operating system.Press down on the raised edge until the clips snap into place.Carefully press the notched edge of the new memory module into the bottom slot while keeping the opposite edge slightly raised.Ssd Upgrade For Mac Mini 2012 Install the new memory Repeat to remove the second, bottom module.Gently spread the clips at the ends of the top memory module just enough to let the free edge pop up.Press on the cover to pop up the opposite side, and then remove the cover.Lay your Mac mini upside down on a soft cloth or towel, and then rotate the bottom cover counterclockwise to the unlocked position.Disconnect the power cord and all other cables from your Mac mini.

From the Apple menu (), choose Shut Down. To remove and install memory in your Mac mini (Late 2012), Mac mini (Mid 2011), or Mac mini (Mid 2010), use the following steps.